Audi AAN Stainless Dipstick Tube Adapter
1071-01
Our AAN stainless dipstick tube adapter replaces the steel factory part which cannot be purchased as an individual component.
The tube is a light press fit into the block - the original part is removed by drifting out from the inside with a suitable sized pin-punch.
Our adapter then taps in to replace it. Installation is even easier if you freeze the adapter first.
The vast majority of AAN blocks were fitted with this short tube adapter, however there are a few variants of these adapters which cross over with the ABY/ADU block through the years of manufacture, and not all are compatible - please check your block to visually confirm which you require.
