MaxxECU RACE Premium Package

MAXX-1786

MaxxECU RACE is a premium fully featured ECU package for engines up to 8 cylinders in sequential configuration or up to 12 cylinders in wasted spark configuration, ready for serious tuning on technical installations.

No expensive add-ons unlock charges, what you see is what you get: high quality, versatility & outstanding value for money.

  • Onboard wideband Lambda (Supplied with Bosch LSU 4.2 or 4.9 wideband sensor)
  • Onboard 400kPa MAP sensor
  • Onboard EGT x8
  • Onboard dual e-throttle
  • Onboard dual knock sensors
  • CAN

Included

  • ECU Unit
  • Main Flying Lead Harness (V1/Race/Pro)
  • Additional Flying Lead Harness (EGT, Knock, E-throttle, I/O)
  • Bosch LSU 4.2 Wideband Lambda Sensor (4.9 upgrade available - please ask)
  • 6 Way Lambda connector Kit
  • 12 Way Delphi GT150 connector kit
  • 1.5m USB Cable (PC Connection)
  • 3m MAP sensor reference hose kit (1/8" nylon tube, push-fit connectors & hose barb)
  • Bluetooth mobile antenna
  • MaxxECU USB stick
  • Additional wire for installation (power & ground)


Full MaxxECU RACE Feature List:

  • All 3-12 cylinder engines (4-stroke)
  • Up to 8 cylinders fully sequentially
  • Up to 12 cylinders in wasted spark

Inputs

  • Intake air temperature sensor (IAT)
  • Coolant temperature sensor (CLT)
  • Throttle position sensor (TPS)
  • Lambda (WBO) sensor. Uses a sensor directly connected to the ECU without any additional electronics. Supports Bosch LSU 4.2 and 4.9
  • 2 trigger inputs. VR or digital. Automatic trigger level detection. The signals are processed by a completely separated processor for maximum performance and immunity against interference
  • 2 extra temperature sensors. Can be used as switches or control of additional functions
  • 2 knock sensor inputs
  • 6 extra 0-5V inputs. Can be used for additional sensors such as measurement oil/fuel pressure
  • 4 extra digital inputs used for example speed sensors (VR / Hall) or switches
  • -8 EGT TYPE-K/N inputs (1200C/2200F) in separate harness

Outputs

  • 8 peak/hold injector outputs. 1-2 high or low impedance injectors per output. 8A per output
  • 8 ignition outputs. 5V signal to drive ignition modules, CDI units or coils
  • 9 extra LOW DRIVING outputs for additional features. Can be adjusted to control virtually anything like fuel pumps, idle valves. GPO 1-8,10 (2A), GPO 9 (5A)
  • 2 extra +12V DRIVING outputs (GPO 15,16) (2A)
  • 4 extra motor outputs (ex E-Throttle). GPO 11-14 (2A)

Technical Specification

  • CAN bus for expansion modules, OEM vehicle CAN, ODBII
  • USB communication for tuning with MTune
  • Bluetooth for connecting to mobile devices with MDash
  • 8MB memory for internal logging, up to 1000Hz.
  • Supply voltage 8-22V
  • ARM Cortex-M3 120MHz main processor. Three extra processors to handle the trigger, injectors and knock detection
  • Resolution on ignition: 0.1 degrees
  • Resolution on injectors: 0.001 ms
  • Updates the fuel and ignition calculations 2000 times per second
  • The fastest PC communication on the market
  • 50Hz sampling rate on all EGT inputs
  • 1000Hz sampling rate on all analog inputs
  • Weight: 880g
  • 155x195x40mm (including mounting points, excluding connector)
Earn 0 reward points
£0.00 £1,162.50
QTY:
Out Of Stock
Add To Wishlist

Want to be notified when this product is back in stock? Complete the form below and we'll send you an email when it is.

The item has been added to your basket

Continue Shopping
Proceed To Checkout